ASUS P5W DH Deluxe (i975X) E6400 Overclock Review

original Thema anzeigen

10.09.06, 08:46:52

gigatron

geändert von: gigatron - 10.09.06, 08:48:04

ASUS P5W DH Deluxe (i975X) E6400 Overclock Review

Specifications :

LGA775 socket for Intel Core2 Duo, Core2 Extreme and next generation Multi-Core CPU
- Intel 975X +Intel ICH7R --1066/800MHz
- Dual-channel DDR2 800/667/ 533 max 8GB
- 2 x PCI-E x 16 / 2 x PCI-E x 1/ 3 x PCI
- Support ATI CrossFire graphics cards
- Intel Matrix Storage technology
- Dual Gigabit LAN
- Dolby Master Studio technology
- ASUS EZ-Backup
- ASUS Digital Home features

Jmicron JMB363 SATAII controller for 1 eSATA and 1 internal SATAII port.
Marvell 88e8053 GbE PHY (2x)
Realtek ALC 882M HD audio codec
Texas Instrument 1394 controller

SiliconImage 4723 Hardware Raid controller for raid 0 / 1 (ASUS EZ-Backup).
3 SATA II + 1 IDE supported by ICH7R in RAID 0,1,5. 2
------------------------------------------------------

Sofort Positiv aufgefallen sind die sehr vielen Overclocking-Optionen.

Das System Frequency/Voltage Menü findet man unter:
Advanced > JumperFree Configuration
CPU-Frequenz: 100-550
DRAM-Frequenz: Auto, (4:3, 1:1, 4:5, 3:4, 2:3, 3:5, 1:2)
Performance Mode: [Auto], Standard, Turbo
PCI Express Frequenz: [Auto], (90-150)
PCI Clock Synchronization Mode: [Auto], To CPU, 33.33MHz
Memory Voltage: [Auto], 1.80V - 2.40V
CPU VCore Voltage: [Auto], 1.2250V - 1.7000V
FSB Termination Voltage: [Auto], 1.20V - 1.50V
MCH Chipset Voltage: [Auto], 1.50V - 1.65V
ICH Chipset Voltage: [Auto], 1.05V - 1.20V

Das Speicher-Timings-Menü findet man unter:
Advanced > Chipset
Configure DRAM Timing by SPD [Disabled]<- für Menü-Erweiterung !
DRAM Timing Selectable : Manual
DRAM CAS# Latency : 3,4,5,6 (tCL)
DRAM RAS# Precharge: 2,3,4,5,6 (tRP)
DRAM RAS# to CAS# Delay: 2,3,4,5,6 (tRCD)
DRAM RAS# Activate to Precharge: 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18 (tRAS)
DRAM Write Recovery Time: 2,3,4,5,6
Hyper Path 3: Auto,Enabled,Disabled
DRAM Throttling Threshold: [Auto], Disabled
Boot Graphic Adapter Priority: [PCI Express/PCI]
PEG Buffer Lenght: [Auto], Long, Short
Link Latency: [Auto], Slow, Normal
PEG Root Control: [Auto], Disabled, Enabled
PEG Link Mode: [Auto], Slow, Normal, Fast, Faster
Slot Power: [Auto], Light, Normal, Heavy, Heavier

Die Fett-Markierten Einstellungen können am Anfang auf [Auto] eingestellt werden lassen.
Diese Funktionen wirken sich event. auch minimal auf das OC-Potenzial des Systems aus,
jedoch ist die Standard-Einstellung für den Anfang zu Empfehlen.

Beim einem Overclocking-Betrieb von FSB:400+ist es nicht immer einfach
die idealen Einstellungen für das gesamte System zu finden :

Bereits ab FSB 233 gibt es die Möglichkeit einen 4:3 (FSB : DRAM) Teiler auszuwählen.

Mit dieser Option besteht auf diesem Mainboard auch die Möglichkeit einen FSB-Takt:400MHz
auszuwählen und dabei einen einen DDR2-667 Speicher auf DDR600(300MHz) zu Betreiben.

Was sich vorallem bei einem FSB-Takt von: 400MHz+ als sehr nützlich bemerkbar machen kann.
(siehe Anhang: P5W DH Deluxe Ram Teiler)

Dateianhang (verkleinert):

 P5W_DH_Deluxe_Ram_Teiler.jpg (28.33 KByte | 58 mal heruntergeladen | 1.6 MByte Traffic)

10.09.06, 08:48:54

gigatron

geändert von: gigatron - 17.11.06, 14:56:02

Test-Setup:

Motherboard: ASUS P5W DH Deluxe (i975X) (Bios:1305), FSB:388MHz, DRAM(4:5)
CPU: Intel Core 2 E6400 @ 3107 MHz (SL9S9,Malay), Stepping: B2 (6-F-6)
Vcore: 1.20v @ Load - 1.49v @ Load (siehe Diagramm <-kommt noch....)
Kühlung: Wasserkühlung
Memory: 2 x 512 MB Corsair 5400UL @ DDR970 (485MHz, tCL:4-tRCD:3-tRP:2-tRAS:2-tWR:2)
Grafik: 2x Geforce 6800GS (SLI)
Chipsatz-Treiber: Intel INF 8.0.1.1002
OS: WindowsXP SP1 (32bit)
HDD: Seagate ST3200822A

Bei einem FSB-Takt von 388MHz mit Speicher-Teiler DRAM(4:5) läuft der Speicher am absoluten
Limit mit diesen Timings: DDR970 (485MHz, tCL:4-tRCD:3-tRP:2-tRAS:2-tWR:2)
Die Performance des Systems ist durch den sehr hohen Speichertakt (bei niedrigen Latency-Zeiten)
sehr hoch. (siehe Everest-Memory-Bench Ergebnisse)

Everest Ultimate Edition 2006 Ergebnisse:
(Ergebnisse anklicken für Screenshot)

Speicher Lesegeschwindigkeit: 15031 MB/s
Speicher Schreibgeschwindigkeit: 7052 MB/s
Speicher Kopierdurchsatz: 7051 MB/s
Speicherverzögerung: 46.8 ns

CPU Queen: 5734
CPU PhotoWorxx: 30092
CPU ZLib: 41222 KB/s
FPU Julia: 8389
FPU Mandel: 11254
FPU SinJulia: 3537




Winace-Bench: 67s :veryhappy:

SuperPI/mod1.5XS 1M Calculation in 17.953

===========================================================
dual: (Hexus Pifast 4.3 Dual Benchmark)
Total computation time : 26.20 seconds (~ 0.01 hours)
Total computation time : 26.20 seconds (~ 0.01 hours)
===========================================================
single:
Total computation time : 23.86 seconds (~ 0.01 hours)
===========================================================
Multithread-Performance: 1,821 =182,1%
-----------------------------------------------------------
10.09.06, 08:50:20

gigatron

geändert von: gigatron - 19.06.07, 19:02:26

ASUS P5W DH Deluxe (i975X) - maximal 100% stabiler FSB-Takt
Bios-Version: 1506 (2006/11/10)

Dieses Bios ermöglicht nun auch das Freischalten des Multiplikators (x6-x8).
Wir verwendeten zum Testen einen Intel Core2 Duo E6400 (pretested) welcher uns von
einem Pretested Hardware Shop zu Verfügung gestellt worden ist.
Somit ist bei diesem Test mit Multiplikator:x6 ein Absturz der CPU 100% auszuschliessen.
(Motherboard-Tests mit diesem Prozessor bis theoretisch FSB:560x6 möglich.)

Hiermit möchten wir uns nochmals bei www.pctweaker.de herzlich dafür Bedanken. :yeah:

Um den maximalen stabilen FSB-Takt zu ermitteln haben wir den Multiplikator
im Bios auf x6 gestellt, hier die Ergebnisse:

Folgende Einstellungen haben wir fix eingestellt lassen:

Performance Mode: Turbo
PCI Express Frequency: Auto
PCI Clock Synchronization Mode: Auto
FSB Termination Voltage: 1.40v
MCH Chipset Voltage: 1.50v - 1.65v (wurde getestet)
ICH Chipset Voltage: 1.05v

DRAM CAS# Latency: 4
DRAM RAS# Precharge: 4
DRAM RAS# to CAS# Delay: 4
DRAM RAS# Activate to Precharge: 4
DRAM Write Recovery Time: 2

Hyper Path 3: Disabled
DRAM Throttling Threshold: Auto
Memory Remap Feature: Disabled

Modify Ratio Support: Enabled (BIOS:1506)
Ratio CMOS Setting: 6
Microcode Updation: Enabled
Max CPUID Value Limit: Disabled
Execute Disable Function: Disabled
Enhanced C1 Control: Disabled
CPU Internal Thermal Control : Disabled

-----------------------------------------------------------

Maximal erreichter stabiler FSB-Takt:
(MCH-Voltage und FSB-Takt siehe Diagramm im Anhang)

MCH Chipset Voltage: 1.65v / FSB:430 Stabil
MCH Chipset Voltage: 1.60v / FSB:420 Stabil
MCH Chipset Voltage: 1.55v / FSB:411 Stabil
MCH Chipset Voltage: 1.50v / FSB:398 Stabil


Dateianhang:

 MCH_Chipset_voltage_diagramm.GIF (2.77 KByte | 44 mal heruntergeladen | 121.9 KByte Traffic)

25.12.09, 12:45:24

gigatron

geändert von: gigatron - 25.12.09, 14:44:13

ASUS P5W DH Deluxe (i975X) - maximal 100% stabiler FSB-Takt mit E5200 @ MP:12
Bios-Version: 3001 (2009/10/22)

Folgende Einstellungen haben wir fix eingestellt lassen:

Performance Mode: Standard
PCI Express Frequency: Auto
PCI Clock Synchronization Mode: Auto
FSB Termination Voltage: 1.40v
MCH Chipset Voltage: 1.60v (wurde getestet)
ICH Chipset Voltage: 1.20v ?1.05

DRAM CAS# Latency: 5
DRAM RAS# Precharge: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Activate to Precharge: 15
DRAM Write Recovery Time: 6

Hyper Path 3: Disabled
DRAM Throttling Threshold: Auto
Memory Remap Feature: Disabled

Modify Ratio Support: Enabled
Ratio CMOS Setting: 12
Microcode Updation: Enabled
Max CPUID Value Limit: Disabled
Execute Disable Function: Disabled
Enhanced C1 Control: Disabled
CPU Internal Thermal Control : Disabled

-----------------------------------------------------------

Maximal erreichter stabiler FSB-Takt:

3393/12.5x271(DDR407)atLoad:1,48v Dist toMax:38c (HP_D:27,67) (bios:1,50v) (ddr cl5-4-4-9) boot243fsb
3363/12.5x269(DDR400)atLoad:1,48v Dist toMax:38c (HP_D:27,66) (bios:1,50v) (ddr cl5-4-4-9) boot243fsb
------------------------------------------------
/12.5x2(DDR)atLoad:1,v Dist toMax:c (HP_D:2 ) (bios:1,45v) (ddr cl5-4-4-9) boot233fsb
------------------------------------------------






------------------------------------------------------
2827/12.5x226(DDR377)atLoad:1,19v Dist toMax:54c (HP_D:31,81) (bios:1,??v) (ddr cl5-5-5-15) boot201fsb
------------------------------------------------------

2730=?=?=?=?
 
Powered by: phpMyForum 4.1.8.1 © Christoph Roeder