ASUS P5K (Intel P35) (Rev.1.02G / Bios:1103) Bios Settings

Test-Setup:
Motherboard: ASUS P5K (Intel P35) (Rev.1.02G / Bios:1103)
CPU: Intel Core 2 Duo E8400 3.00GHz, Stepping: E0 (6-7-A) , (Malay)
Vcore: 1.02v @ Load - 1.34v @ Load (siehe Diagramm)
Kühlung: CPU Wassergekühlt
Memory: 2x 1024MB @ BIOS: tCL:4 tRCD:4 tRP:4 tRAS:10 tRRD:5 tRFC:35 tWR:3 tWTR:3 tRTP:3 (D9GKX / MT47H64M8B6-25E)
Netzteil: Enermax Infiniti 650W ATX 2.2 (EIN650AWT)
OS: Windows Vista 32-bit

Höchster Erreichter stabiler FSB-Takt bei Memtest86+ v2.01:
FSB: 552 x 7,0 / CPU: 3.86GHz / DDR 1104 / Memtest86+ v2.01: 6065MB/s) (5-4-4-9-6-35-6-3-3) (D9GMH)
FSB: 550 x 7,0 / CPU: 3.85GHz / DDR 1100 / Memtest86+ v2.01: 6043MB/s) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 544 x 7,5 / CPU: 4.09GHz / DDR 1089 / Memtest86+ v2.01: 5993MB/s) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 544 x 8,0 / CPU: 4.35GHz / DDR 1088 / Memtest86+ v2.01: 5979MB/s) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 544 x 8,5 / CPU: 4.62GHz / DDR 1088 / Memtest86+ v2.01: 6182MB/s) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 535 x 9,0 / CPU: 4.81GHz / DDR 1070 / Memtest86+ v2.01: 6071MB/s) (5-3-3-11-5-30-3-3-3) (D9DQW)(Bios:1,575)


Höchster Erreichter bootfähiger FSB-Takt:
FSB: 528 x 7,0 / CPU: 3.69GHz / DDR 1056 at Load:1,464v (bios:1,575) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 528 x 7,5 / CPU: 3.98GHz / DDR 1268 at Load:1,416v (bootfähig) (5-4-4-9-6-35-6-3-3) (D9GMH)
FSB: 528 x 7,5 / CPU: 3.96GHz / DDR 1056 at Load:1,464v (bios:1,575) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 518 x 8,0 / CPU: 4.16GHz / DDR 1038 at Load:1,464v (bios:1,575) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 505 x 8,5 / CPU: 4.29GHz / DDR 1010 at Load:1,464v (bios:1,575) (5-3-3-11-5-30-3-3-3) (D9DQW)
FSB: 505 x 8,5 / CPU: 4.29GHz / DDR 1213 at Load:1,416v (bootfähig) (5-4-4-9-6-35-6-3-3) (D9GMH)
FSB: 490 x 9,0 / CPU: 4.41GHz / DDR 1176 at Load:1,416v (bootfähig) (5-4-4-9-6-35-6-3-3) (D9GMH)
*FSB: 505 x 9,0 / CPU: 4.XXGHz / DDR 10XX at Load:1,464v (bios:1,575) (5-3-3-11-5-30-3-3-3) (D9DQW)

boot at 4.61ghz 512FSB x 9.0 = OKAY

boot at 4.65ghz 517FSB x 9.0 = OKAY !!!

boot at 4.65ghz 517FSB x9.0 = OKAY DDR 1016 at Load:1,472 (bios 1,600v) 17,15 (4-3-3-8-6-30-3-3-3) cpu-max:69c !!!








Höchster Erreichter Pifast-Dual stabiler FSB-Takt:
FSB: 522 x 7,0 / CPU: 3.66GHz / DDR 1044 at Load:1,464v (bios:1,575) Pifast-Dual: 20,68 (5-3-3-11-5-30-3-3-3) (CPU-Temp-Max:61c)
FSB: 528 x 7,5 / CPU: 3.98GHz / DDR 1268 at Load:1,416v Pifast-Dual: 19,36 (5-4-4-9-6-35-6-3-3)
FSB: 522 x 7,5 / CPU: 3.92GHz / DDR 1044 at Load:1,464v (bios:1,575) Pifast-Dual: 19,91 (5-3-3-11-5-30-3-3-3) (CPU-Temp-Max:61c)
FSB: 518 x 8,0 / CPU: 4.14GHz / DDR 1036 at Load:1,464v (bios:1,575) Pifast-Dual: 18,92 (5-3-3-11-5-30-3-3-3) (CPU-Temp-Max:63c)
FSB: 530 x 8,5 / CPU: 4.50GHz / DDR 1060 at Load:1,464v (bios:1,575) Pifast-Dual: 17,66 (5-3-3-11-5-30-3-3-3) (CPU-Temp-Max:65c)
FSB: 519 x 9,0 / CPU: 4.67GHz / DDR 1038 at Load:1,464v (bios:1,575) Pifast-Dual: 17,44 (5-3-3-11-5-30-3-3-3) (CPU-Temp-Max:67c)

FSB: 500 x 9,0 / CPU: 4.50GHz / DDR 1200 at Load:1,416v Pifast-Dual: 17,35 (5-4-4-9-6-35-6-3-3) (D9GMH)
FSB: 508 4.57 DDR 1016 17,28 (4-3-3-8-6-30-3-3-3)

FSB: 519 x 9,0 / CPU: 4.67GHz / DDR 1038 at Load:1,464v (bios:1,575) Pifast-Dual: 17,10 (5-3-3-9-5-30-3-3-3) (CPU-Temp-Max:67c)



Höchster Erreichter Pifast3355Dual stabiler FSB-Takt:
FSB: 526 x 7,0 / CPU: 3.68GHz / DDR 1052 at Load:1,464v (bios:1,575) Pifast3355Dual: 82,60 (CPU-Temp-Max:61c) (5-3-3-11-5-30-3-3-3)
FSB: 530 x 7,5 / CPU: 3.98GHz / DDR 1060 at Load:1,464v (bios:1,575) Pifast3355Dual: 78,53 (CPU-Temp-Max:64c) (5-3-3-11-5-30-3-3-3)
FSB: 515 x 8,0 / CPU: 4.11GHz / DDR 1235 at Load:1,416 Pifast3355Dual: 75,21 (5-4-4-9-6-35-6-3-3) (CPU-Temp-Max:61c)
FSB: 525 x 8,0 / CPU: 4.20GHz / DDR 1050 at Load:1,456v (bios:1,575) Pifast3355Dual: 75,11 (CPU-Temp-Max:64c) (5-3-3-11-5-30-3-3-3)
FSB: 522 x 8,5 / CPU: 4.43GHz / DDR 1044 at Load:1,464v (bios:1,575) Pifast-Dual: 72,28 (5-3-3-11-5-30-3-3-3) (CPU-Temp-Max:65c)
FSB: 505 x 8,5 / CPU: 4.29GHz / DDR 1213 at Load:1,416 Pifast3355Dual: 71,82 (5-4-4-9-6-35-6-3-3) (CPU-Temp-Max:62c)


* FSB: 505 x 9,0 / CPU: 4.43GHz / DDR 10XX at Load:1,464v (bios:1,575) Pifast-Dual: 7x,XX (5-3-3-11-5-30-3-3-3) (CPU-Temp-Max:6xc)

Bios Settings
(für 100% stabilen Betrieb auf 4.42GHz mit DDR 1200)

für Boot at FSB: 490 @ DDR 1177 CL4-4-4-10-5-35-3-3-3 (Boost Level:2)

CPU Ratio Setting: 8.5
FSB Strap to North Bridge : 333
FSB Frequency: 500
PCIE Frequency: 101
DRAM Frequency: DDR2-1200MHz
DRAM Command Rate: 2N
DRAM Timing Control: 4-4-4-10-5-35-3-3-3
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 2

CPU Voltage: 1.42500
CPU PLL Voltage: 1.50
FSB Termination Voltage: 1.40
DRAM Voltage: 2.50 (Real:2.80v)
NB Voltage: 1.55
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.61x
NB GTL Voltage Reference: 0.61x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

--------------------------------
CPU Ratio Setting: 8.5
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Disable Bit: Disabled
Max CPUID Value Limit: Disabled
--------------------------------

Bios Settings (nov 2008 überarbeitet)
(für 100% stabilen Betrieb auf 4.35GHz mit DDR 1023)

für Boot at FSB: 512 @ DDR 1026 CL4-4-4-12-6-45-12-12-12 (Boost Level:2)

Benchmark-Stabil at FSB: 522.6 @ DDR 1045 (in Windows mit SetFSB 2.0.b.15f eingestellt)

CPU Ratio Setting: 8.5
FSB Strap to North Bridge : 333
FSB Frequency: 512
PCIE Frequency: 101
DRAM Frequency: DDR2-1026MHz
DRAM Command Rate: 2N
DRAM Timing Control: 4-4-4-12-6-45-12-12-12
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 2

CPU Voltage: 1.38750
CPU PLL Voltage: 1.50
FSB Termination Voltage: 1.40
DRAM Voltage: 2.50 (Real:2.70v)
NB Voltage: 1.55
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.61x
NB GTL Voltage Reference: 0.61x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

--------------------------------
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Disable Bit: Disabled
Max CPUID Value Limit: Disabled
--------------------------------

Bios Settings
(für 100% stabilen Betrieb auf 4.39GHz mit DDR 1235)

für Boot at FSB: 514 @ DDR 1235 CL4-4-4-10-5-35-3-3-3 (Boost Level:2)

CPU Ratio Setting: 8.5
FSB Strap to North Bridge : 333
FSB Frequency: 514
PCIE Frequency: 101
DRAM Frequency: DDR2-1235MHz
DRAM Command Rate: 2N
DRAM Timing Control: 4-4-4-10-5-35-3-3-3
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 2

CPU Voltage: 1.42500
CPU PLL Voltage: 1.50
FSB Termination Voltage: 1.40
DRAM Voltage: 2.45 (Real:2.78v)
NB Voltage: 1.55
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Auto
CPU GTL Voltage Reference: 0.61x
NB GTL Voltage Reference: 0.61x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

--------------------------------
CPU Ratio Setting: 8.5
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Disable Bit: Disabled
Max CPUID Value Limit: Disabled
--------------------------------
Notiz:
----------------------------------------------------------------------------------------------------------

D9GKX laufen im Single-Channel-Modus MemTest Loop#5 stabil mit folgenden Settings:
CPU-Vcore:1,42 im Bios (Boost-Level:2)
Timings: 4-4-4-10-5-35-3-3-3

(D9GKX #8) SCDDR:1235 bei FSB:514 @ 2,78v (4646mb/s) boost:L2 CPU:4377 MHz
(D9GKX #8) SCDDR:1219 bei FSB:508 @ 2,73v (4583mb/s) boost:L2 CPU:4318 MHz
----------------------------------------------------------------------------------------------------------
(D9GKX #1) SCDDR:1235 bei FSB:514 @ 2,78v (4646mb/s) boost:L2 CPU:4377 MHz
(D9GKX #1) SCDDR:1228 bei FSB:512 @ 2,73v (4620mb/s) boost:L2 CPU:4352 MHz
(D9GKX #1) SCDDR:1212 bei FSB:505 @ 2,66v (4556mb/s) boost:L2 CPU:4293 MHz
(D9GKX #1) SCDDR:1195 bei FSB:498 @ 2,61v (4493mb/s) boost:L2 CPU:4233 MHz
(D9GKX #1) SCDDR:1166 bei FSB:486 @ 2,53v (4385mb/s) boost:L2 CPU:4131 MHz
----------------------------------------------------------------------------------------------------------
(D9GKX #3) SCDDR:1238 bei FSB:516 @ 2,73v (4656mb/s) boost:L2 CPU:4386 MHz
(D9GKX #3) SCDDR:1224 bei FSB:510 @ 2,66v (4602mb/s) boost:L2 CPU:4335 MHz
(D9GKX #3) SCDDR:1209 bei FSB:504 @ 2,61v (4547mb/s) boost:L2 CPU:4284 MHz
(D9GKX #3) SCDDR:1185 bei FSB:494 @ 2,53v (4457mb/s) boost:L2 CPU:4199 MHz
----------------------------------------------------------------------------------------------------------

P.s.: Durch den ausgeführten vdimm-Mod auf diesem P5K
ergeben die BIOS-Vdimm Einstellung folgendes:

2,55v = 2,87v / 2,50v = 2,83v / 2,45v = 2,77v /
2,40v = 2,73v / 2,35v = 2,66v / 2,30v = 2,61v /
2,20v = 2,53v /

Bios Settings
(für 100% stabilen Betrieb auf FSB:525.8 4.20GHz mit DDR 1050)

für Boot at FSB: 520 @ DDR 1040 CL4-4-4-12-6-45-12-12-12 (Boost Level:2)

Benchmark-Stabil at FSB: 528.2 @ DDR 1056 / CPU: 4225 (in Windows mit SetFSB 2.0.b.15f eingestellt)
Pi3355-Dual Ergebniss:77.16s (atLoad:1,384 CPU-Temp-Max:59c) CPU:
HP-Dual-Ergebniss: 18,94

CPU Ratio Setting: 8.0
FSB Strap to North Bridge : 400
FSB Frequency: 520
PCIE Frequency: 102
DRAM Frequency: DDR2-1040MHz
DRAM Command Rate: 2N
DRAM Timing Control: 4-4-4-12-6-45-12-12-12
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 1

CPU Voltage: 1.5000
CPU PLL Voltage: 1.50
FSB Termination Voltage: 1.40
DRAM Voltage: 2.45 (Real:2.77v)
NB Voltage: 1.55
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.61x
NB GTL Voltage Reference: 0.61x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

--------------------------------
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Disable Bit: Disabled
Max CPUID Value Limit: Disabled
--------------------------------

----------------------------------------------------------------------------------------------------------

P.s.: Durch den ausgeführten vdimm-Mod auf diesem P5K
ergeben die BIOS-Vdimm Einstellung folgendes:

2,55v = 2,87v / 2,50v = 2,83v / 2,45v = 2,77v /
2,40v = 2,73v / 2,35v = 2,66v / 2,30v = 2,61v /
2,20v = 2,53v /

Bios Settings
(für 100% stabilen Betrieb auf FSB:528 mit DDR 1267)

Memtest Stabil at FSB: 528 @ DDR 1267 / CPU: 3696 (6647MB/s)

für Boot at FSB: 528 @ DDR 1267 CL5-4-4-9-6-35-6-3-3 (Boost Level:2)

Benchmark-Stabil at FSB: 528 @ DDR 1267 / CPU: 3696 (in Windows mit SetFSB 2.0.b.15f eingestellt)

CPU Ratio Setting: 7.0
FSB Strap to North Bridge : 333
FSB Frequency: 528
PCIE Frequency: 103
DRAM Frequency: DDR2-1268MHz
DRAM Command Rate: 2N
DRAM Timing Control: 5-4-4-9-6-35-6-3-3
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 2

CPU Voltage: 1.5250
CPU PLL Voltage: 1.70
FSB Termination Voltage: 1.40
DRAM Voltage: 2.45 (Real:2.78v)
NB Voltage: 1.55
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63x
NB GTL Voltage Reference: 0.67x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

--------------------------------
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Disable Bit: Disabled
Max CPUID Value Limit: Disabled
--------------------------------

----------------------------------------------------------------------------------------------------------

P.s.: Durch den ausgeführten vdimm-Mod auf diesem P5K
ergeben die BIOS-Vdimm Einstellung folgendes:

2,55v = 2,87v / 2,50v = 2,83v / 2,45v = 2,77v /
2,40v = 2,73v / 2,35v = 2,66v / 2,30v = 2,61v /
2,20v = 2,53v /

Bios Settings
(für 100% stabilen Betrieb auf FSB:552 mit DDR 1104)

Memtest Stabil at FSB: 552 @ DDR 1104 / CPU: 3864 (6065MB/s)

für Boot at FSB: 5xx @ DDR 1xxx CL5-4-4-9-6-35-6-3-3 (Boost Level:2)

Benchmark-Stabil at FSB: 5xx @ DDR 1xxx / CPU: 3xxx (in Windows mit SetFSB 2.0.b.15f eingestellt)

Pi3355-Dual Ergebniss:xx.xxs (atLoad:1,xxx CPU-Temp-Max:xxc) CPU:
HP-Dual-Ergebniss: xx,xx

CPU Ratio Setting: 7.0
FSB Strap to North Bridge : 333
FSB Frequency: 548
PCIE Frequency: 103
DRAM Frequency: DDR2-1098MHz
DRAM Command Rate: 2N
DRAM Timing Control: 5-4-4-9-6-35-6-3-3
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 2

CPU Voltage: 1.5250
CPU PLL Voltage: 1.70
FSB Termination Voltage: 1.40
DRAM Voltage: 2.45 (Real:2.78v)
NB Voltage: 1.55
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63x
NB GTL Voltage Reference: 0.67x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

--------------------------------
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Disable Bit: Disabled
Max CPUID Value Limit: Disabled
--------------------------------

----------------------------------------------------------------------------------------------------------

P.s.: Durch den ausgeführten vdimm-Mod auf diesem P5K
ergeben die BIOS-Vdimm Einstellung folgendes:

2,55v = 2,87v / 2,50v = 2,83v / 2,45v = 2,77v /
2,40v = 2,73v / 2,35v = 2,66v / 2,30v = 2,61v /
2,20v = 2,53v /

Bios Settings (D9DQW)
(für 100% stabilen Betrieb auf FSB:517 mit DDR 1034)

Memtest Stabil at FSB: 517 @ DDR 1034 / CPU: 4653 (6xxxMB/s)

für Boot at FSB: 517 @ DDR 1034 CL4-3-3-8-6-35-6-3-3 (Boost Level:2)

Benchmark-Stabil at FSB: 517 @ DDR 1034 / CPU: 4653 (in Windows mit SetFSB 2.0.b.15f eingestellt)

CPU Ratio Setting: 9.0
FSB Strap to North Bridge : 333
FSB Frequency: 517
PCIE Frequency: 103
DRAM Frequency: DDR2-1036MHz
DRAM Command Rate: 2N
DRAM Timing Control: 4-3-3-8-6-30-3-3-3
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 2

CPU Voltage: 1.5750
CPU PLL Voltage: 1.70
FSB Termination Voltage: 1.40
DRAM Voltage: 2.20 (Real:2.53v)
NB Voltage: 1.55
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63x
NB GTL Voltage Reference: 0.67x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

--------------------------------
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Disable Bit: Disabled
Max CPUID Value Limit: Disabled
--------------------------------

----------------------------------------------------------------------------------------------------------

P.s.: Durch den ausgeführten vdimm-Mod auf diesem P5K
ergeben die BIOS-Vdimm Einstellung folgendes:

2,55v = 2,87v / 2,50v = 2,83v / 2,45v = 2,77v /
2,40v = 2,73v / 2,35v = 2,66v / 2,30v = 2,61v /
2,20v = 2,53v /