Intel Core 2 Quad Q9650 3.00GHz @ 4.510 GHz SLB8W (6-7-A E0-Stepping) Wassergekühlt

(CPU-Z Validated) (31.07.2010)

(CPU-Z Validated) (02.05.2009)

Core(TM) 2 Quad Processor Q9650, LGA 775 (Yorkfield)
3.00 GHz, FSB 1333 MHz, L2 Cache 12MB, Core 45nm, PCG 05A
Prod.Code: BX80569Q9650 S-spec: SLB8W
MM#: 899134 FPO/Batch#: L825B323 (Malay)
Ver #: E44553-001
Pack Date:08/25/08
(Wafer-ID: 2V82516 7A1214)


Test-Setup:
Motherboard: ASUS Maximus II Formula (Rev.1.02G / Bios:1501)
CPU: Intel Core 2 Quad Q9650 3.00GHz, Stepping: E0 (6-7-A) , (Malay)
Vcore: 1.12v @ Load - 1.34v @ Load (siehe Diagramm)
Kühlung: Wasserkühlung
Memory: 2x 1024MB @ BIOS: tCL:4 tRCD:4 tRP:3 tRAS:3 tRRD:3 tRFC:20 tWR:3 tWTR:3 tRTP:3 (D9GKX / MT47H64M8B6-25E)
Netzteil: Enermax Infiniti 650W ATX 2.2 (EIN650AWT)
OS: Windows Vista 32-bit

Q9650E0 @ 4.303 GHz / 478 / 574 / 1,33v / 1,3250 / Distance: 19c to TJ Max

Q9650E0 @ 4.210 GHz / 468 / 561 / 1,28v / 1,2750 / Distance: 30c to TJ Max

Q9650E0 @ 4.124 GHz / 485 / 582 / 1,25v / 1,2500 / Distance: 35c to TJ Max

Q9650E0 @ 3.963 GHz / 466 / 559 / 1,20v / 1,2000 / Distance: 47c to TJ Max



***************************

ab hier nur notizen ......

***************************



Ein Boot auf MP9.0x480FSB ist bereits gelungen mit folgenden Settings:

4320 (480x9) DDR960 = 72,33@L:1,37v Dist to TJMAX:42c 5-5-5-15-3-42-6-3 8-3-5-4-6-4-6 14-5-1-5-5 PCS
HP-DUAL in 18,02+18,02 !!! (Ai Clock Twister:AUTO??? / Perf-Level:AUTO:13! ) 5-5-5-15 sonst alles auto!
-
Q9650 at 485FSB FSB-TERM:1.51v
vcore:1,40 dram 2,21
NB:1.48v CPU-PLL:1,79 SB1.1=1.31 SB1.5=1.60
-
da nun 480fsb bootfähig die voltages minimieren +
event. timings u.s.w. verschärfen !!!
pi3355 in 72.56 sec. okay @ 480FSB(4324MHz at load:1,37v)
pi3355 in 73.25 sec. okay @ 476FSB(4281MHz at load:1,34v)
-
***************************
Hexus PiFast 3355 Quad Benchmark Ergebnisse
********************
4217 (468)@1.27L dtmax 47c > 86.70s (cb:24.7) (@Pifast3355Quad-Bench) cb:21,5 @ idle (bios:1406) (26.11.2008)
********************
4152 (461)@1.25L dtmax 50c > 89.18s (cb:23.9) (@Pifast3355Quad-Bench) cb:21,8 @ idle (bios:1406) (26.11.2008)
*******************
4045 (449)@1.22L dtmax 53c > 92.37s (cb:24.7) (@Pifast3355Quad-Bench) cb:21,6 @ idle (bios:1406) (26.11.2008)
******************
3716 (413)@1.14L dtmax 61c > 100.02s (cb:22.3) (@Pifast3355Quad-Bench) cb:21,6 @ idle (bios:1406) (26.11.2008)


auf ASUS P5Q Deluxe: (25.11.2008)
Q9650E0 can 4.274 GHz / 475 / 475 / 1,35v / Distance: 36c to TJ Max (x9.0=4275) Hexus-Pifast-Quad-Bench: xx.xxs (CB-Temp:26,5)

auf ASUS P5Q Deluxe: (23.11.2008)
Q9650E0 can 4.195 GHz / 466 / 466 / 1,35v / Distance: 35c to TJ Max (x9.0=4196) Hexus-Pifast-Quad-Bench: 21.67s
*****************************
als kurztest wurde
Hexus-Pifast 4.3-Quad verwendet.

ergebniss:

Q9650= 4.152 GHz / 461 / 461 / 1,27v / 1,27500 / (CPU:52c) Distance to TJ Max: 48c (Prime 4min OKAY) CB=25.6c
(Vcore:1.27 VTTCPU:1,30v CPUPLL:1.55v SB11:1.27v SB15:1.51v NB11:1.39v ) Hexus-Pifast-Quad-Bench: 22.57s NB:43c

max fsb nb-volt bedingt?

Q9650= 3.870 GHz / 430 / 430 / 1,21v / 1,22500 / (CPU:47c) Distance to TJ Max: 53c (Prime 4min OKAY) CB=25.3c
(Vcore:1.20 VTTCPU:1,30v CPUPLL:1.55v SB11:1.27v SB15:1.51v NB11:1.40v ) Hexus-Pifast-Quad-Bench: 24.06s

Q9650= 3.716 GHz / 413 / 413 / 1,144v / 1,2000 / (CPU:42c) Distance to TJ Max: 58c (Prime 4min OKAY) CB=23.5c
(Vcore:1.20 VTTCPU:1,30v CPUPLL:1.50v SB11:1.26v SB15:1.51v NB11:1.30v ) Hexus-Pifast-Quad-Bench: 25.31s

Q9650= 3.609 GHz / 401 / 401 / 1,144v / 1,2000 / (CPU:42c) Distance to TJ Max: 58c (Prime 4min OKAY) CB=23.5c
(Vcore:1.13 VTTCPU:1,20v CPUPLL:1.50v SB11:1.18v SB15:1.50v NB11:1.20v ) Hexus-Pifast-Quad-Bench: 25.64s

Q9650= 3.523 GHz / 391 / 391 / 1,088v / 1,1000 / (CPU:39c) Distance to TJ Max: 61c (Prime 4min OKAY) CB=22.4c
(Vcore:1.09 VTTCPU:1,14v CPUPLL:1.50v SB11:1.17v SB15:1.50v NB11:1.14v )

Q9650= 3.000 GHz / 333 / 333 / 0,98v / 1,0000 / (CPU:33c) Distance to TJ Max: 67c (Prime 4min OKAY) CB=22.4c

CB= Temp. vom Boden des Kühlers




**********************
hier der Q9450 im vergleich:

Als Stabilitäts-Test wurde Prime95(v25.4) Torture Test (Small FFTs) verwendet.

Torture Test Settings:
Small FFTs (maximum FPU stress, data fits in L2 cache, RAM not tested much)
Number of torture test threads to run: 4

CPU-Takt: / FSB / DDR-MHz / @LOAD / BIOS-Setting(Vcore) / CPU-Temp-MAX

3.904 GHz / 488 / 488 / 1,32v / 1,3750 / 77c Prime 42min OKAY Distance to TJ Max:28 (TJMax:105)
3.870 GHz / 484 / 484 / 1,30v / 1,3500 / 75c Prime 16min OKAY Distance to TJ Max:30 (TJMax:105)

3.761 GHz / 470 / 587 / 1,25v / 1,3000 / 73c Prime 4min OKAY Distance to TJ Max:32 (TJMax:105) (new!)

3.761 GHz / 470 / 470 / 1,25v / 1,3000 / 60c (new!) Prime 22min OKAY
3.600 GHz / 450 / 450 / 1,21v / 1,2500 / 56c (new!) Prime 23min OKAY
3.266 GHz / 408 / 408 / 1,11v / 1,1500 / 49c (new!) Prime 16min OKAY



************************




dann mit setfsb auf :
4410at 490FSB:HP-DUAL in 17.53+17.53
4439at 493FSB:HP-DUAL in ERROR at 493FSB!!!


-------------------------------------------------------
3600(400x9) DDR800 = 89,17 @L:1,496 Dist to TJMAX:37c 4-4-4-10-5-35-6-3 8-2-4-4-6-4-6 11-4-1-4-4 level:10
(Ai Clock Twister:Lighter / Perf-Level:10 / CPU Margin Enhancement: Performance Mode / STRAP:333)

Allerdings benchen und primen bei XS die Jungs seit mehreren Wochen mit Auto Settings also VTT@1,6V - PLL@1,7V+ und vMCH@1,8v sogar teilweise und komischerweise ist noch keiner CPU / Board was passiert.

Q9550 auf Gigabyte EP45-EXTREME mit 8.5x518FSB !!!
CPU-Vcore set:1.49 ist at load:1.376

CPU-PLL: 1.66v
CPU Term: 1.40v
CPU Reference: 0.76
CPU Reference2: 0.80

DRAM Voltage: 2.06
DRAM Termination 0.90
CH A Ref: 0.90
CH B Ref: 0.90

MCH Core: 1.40v
MCH/DRAM REFerence 0.90
MCH Reference 0.76
ICH / IO 1.50
ICH Core: 1.10

.... hier ein anderer Q9650 zum testen....

Prod.Code: BX80569Q9650 S-spec: SLB8W
MM#: 899134 FPO/Batch#: L824B301 (Malay)
Ver #: Exxxxx-xxx
Pack Date:0x/xx/0x
(Wafer-ID: 3582748 0A0654)

----------------------------------
Test#10 (Bios-Settings) Q9650 @ 4.59GHz (9.0x510FSB)
nun läuft Prime95 Torture Test at 510FSB!
4593@510FSB/1020/DDR(510MHz) / (CPU:64c@1.42v@FLoad)ok 5-5-5-18 hps:16,03 hpd:17,02 hpquad:21,23 winace:51s CB-R10:17441
CPU Ref:0.926v/CPU-Term:1.40v = (CPU REF-Faktor:0,661x)
MCH Ref:0.926v/MCH Core:1.40v = (MCH REF-Faktor:0,661x)
MCH/DRAM Reference:1.20v………CPU-PLL:1.61v………ICH I/O:1.61v………ICHCore:1.20v………DRAM Voltage:2.40v………DRAM Termination:1.20v………Channel A Ref:1.20v………Channel B Ref:1.20v
----------------------------------


Q9650E0 @ 4.500 GHz / 500 / 500 / 1,41v / 1,4250 / Distance: 44c to TJ Max (cpu-max:61c) nb:38c pwr:48c wasser:21c CB:22c

Q9650E0 @ 4.250 GHz / 500 / 500 / 1,33v / 1,3250 / Distance: 52c to TJ Max (cpu-max:53c) nb:41c pwr:44c wasser:22c CB:23c


dieser Q9650 ist auf dem GigaByte GA-EP45-UD3P den HexusPiFast-Dual bereits auf 4.72GHz (524x9.0) durch gelaufen ....

....siehe Screenshot @ 4.72GHz (524x9.0) :yeah:

hier 509FSB mit wasserkühlung

Test#11 (Bios-Settings) Q9650 @ 4.44GHz (9.0x493FSB)
nun läuft Prime95 Torture Test at 493FSB!
4440@493FSB/986/DDR(493MHz) / (CPU:59c@1.36v@FLoad)ok
4-4-4-12

hps: hpd: hpquad: winace:s CB-R10:
Vcore:1,375(@Load:1,36v)

CPU Ref:0.926v/CPU-Term:1.40v = (CPU REF-Faktor:0,661x)
MCH Ref:0.926v/MCH Core:1.40v = (MCH REF-Faktor:0,661x)
MCH/DRAM Reference:1.20v………CPU-PLL:1.61v………ICH(MCH) I/O:1.61v………ICHCore:1.20v………DRAM Voltage:2.40v………DRAM Termination:1.20v………Channel A Ref:1.20v………Channel B Ref:1.20v