ASUS P5Q Deluxe (Intel P45/ICH10R) (Rev.1.03G / Bios:1702modded) Overclock Review

Clock Generator: ICS9LPRS918BKL <- funktioniert mit SETFSB

MEMTEST86+v2.10 Tests konnten sogar mit (FSB:612 x 6.0) E8600 at 3.673GHz DDR1224 erfolgreich abgeschlossen werden!

Test-Setup:
Motherboard: ASUS P5Q Deluxe (Intel P45/ICH10R) (Rev.1.03G / Bios:1702)

CPU: Intel Core 2 Duo E8600 3.33GHz, Stepping: E0 (6-7-A) , (Malay)


mit 1.54vNB max 4530 (529x8.5) möglich
mit 1.50vNB max 4423 (553x8.0) möglich

erste Tests mit Boot at 4.40GHz (FSB:550 x 8.0) OKAY !

Bios Settings P5Q Deluxe / E8600 Boot at 4.4GHz (550FSB x MP:8.0)

VDimm ----> Übervoltet um 0,13V
VNb ------> Übervoltet um 0,06V
VTT ------> Übervolter um 0,03V
PLL -------> Übervoltet um 0,07V


CPU Ratio Setting: 8.0
FSB Frequency: 540 = 4320MHz !!!
PCIE Frequency: 101
FSB Strap to North Bridge : AUTO
DRAM Frequency: DDR2-1080MHz
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual

1st Inf: CL5-5-5-15-6-45-6-3
2nd Inf: 8-3-6-4-6-4-6
3rd Inf: 14-5-1-5-5

DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Enabled
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 13
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.4000
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.630
CPU PLL Voltage: 1.70 -> auf deluxe 600FSB geht mit 1.6 ???
FSB Termination Voltage: 1.38 -> auf deluxe 600fsb geht mit 1.35???
DRAM Voltage: 2.40
NB Voltage: 1.34 1.34geht auch bis 600????
NB GTL Reference: AUTO
SB Voltage: 1.10 soll:AUTO????
PCIE SATA Voltage: 1.60 soll:AUTO???

--------------------------------

Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Normal
NB Clock Skew: Normal
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 8.0
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------



Dazu, was die einzelnen Einstellungen bewirken, schreib' ich mal zusammen, was ich so im Netz gefunden habe:

Zitat:
Was bewirkt der FSB Strap to North Bridge / Definition des Straps (von teuflor aus forumdeluxx abgekupfert)

* Als Strap bezeichnet man den internen Teiler der NB bzw. den Takt, mit dem diese arbeitet.
* Der (interne) NB-Takt ist direkt an den FSB gebunden, somit steigt dieser zwingend mit einer Erhöhung des FSBs an.
* Durch bestimmte Grenzen der NB ist es notwendig, diese ab einem bestimmten FSB zu entschärfen/herunterzutakten, um den FSB weiter zu erhöhen.
* Die ist ähnlich dem Multiplikator der CPU. Erreicht die CPU eine Wall senkt man den Multi, um den FSB weiter erhöhen zu können
* Je niedriger der Strap, umso höher der interne NB-Takt! Dies verbessert die Timings und auch den Durchsatz, wenn auch lange nicht so sehr wie ein höherer FSB.
* Abschließend wird der NB-Takt auch vom default/aktuellem Multiplikator beeinflusst.


DRAM Static Read Control
Ist diese Option auf Enabled, dann sollte es das Speicher-Overclocking verbessern,
in der Praxis bewirkt es aber meist das Gegenteil, daher sollte man auf Disabled stellen.

DRAM Read Training
Ist diese Option auf Auto, so werden die Datenzugriffe automatisch optimiert.
Bei diesem Verfahren handelt es sich um einen Lernmechanismus, der den sonst fixierten DRAM CLK SKEW durch die Analyse
der Daten automatisch auf den optimalen Wert der aktuellen Clock- bzw. Timing-Settings anpasst.

Mem. OC Charger
Hinter dieser Einstellung versteckt sich das, was dazu nötig ist, um den P45-Chipsatz in Sachen Speichertakt auf Vordermann zu bringen.
Sie bewirkt die Anpassung des Signals, damit der Betrieb auch bei hohem Takt/engeren Timings "innerhalb der Spezifikationen" gehalten werden kann,
und es nicht zu Instabilitäten kommt. Vereinfacht gesagt verbessert der OC Charger durch Veränderung des Signals die Stabilität,
ohne dass man die Spannung erhöhen müsste.

boot settings für 4.80GHz 9,5 x 505 ddr 1213 5-4-4-9

CPU Ratio Setting: 9.5
FSB Frequency: 505 = 4.80GHz !!!
PCIE Frequency: 101
FSB Strap to North Bridge : AUTO
DRAM Frequency: DDR2-1213MHz
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual

1st Inf: CL5-4-4-9-6-45-6-3
2nd Inf: 8-3-6-4-6-4-6
3rd Inf: 14-5-1-5-5

DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Enabled
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 15
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.5500
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.630
CPU PLL Voltage: 1.62
FSB Termination Voltage: 1.44 -> auf deluxe 600fsb geht mit 1.35???
DRAM Voltage: 2.50
NB Voltage: 1.44 1.34geht auch bis 600????
NB GTL Reference: AUTO
SB Voltage: 1.30 soll:AUTO????
PCIE SATA Voltage: 1.60 soll:AUTO???

--------------------------------

Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Normal
NB Clock Skew: Normal
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 9.5
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------



wichtiges zu gtls

siehe Quelle: http://www.forumdeluxx.de/forum/showthread.php?p=10140051

sonstige infos:
VTT würd ich für nen Dual nicht mehr als 1,28 also <1,3 geben das reicht bis zu FSB600

bei nem Quad brauchst du mehr, da würde ich mir <1,4V als Grenze legen.

VNb: 1,45 is schon sehr sehr viel für nen P45, normal biste weit unter 1,4

für FSB500@Quad brauchste schnell mal 1,45V


Wichtiges zur VTT:

made the mistake of using a very high VTT termination voltage of 1.51V

(VTT is used to terminate data lines between the MCH and CPU).

Bios Settings auf P5Q Deluxe mit P45 (E8600 at MP:8.0)

VDimm ----> Übervoltet um 0,13V
VNb ------> Übervoltet um 0,06V
VTT ------> Übervolter um 0,03V
PLL -------> Übervoltet um 0,07V


CPU Ratio Setting: 8.0
FSB Frequency: 525 = 4200MHz !!!
PCIE Frequency: 101
FSB Strap to North Bridge : AUTO
DRAM Frequency: DDR2-1050MHz
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual

1st Inf: CL5-5-5-15-6-45-6-3
2nd Inf: 8-3-6-4-6-4-6
3rd Inf: 14-5-1-5-5

DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Enabled
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 13
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.4000
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.630
CPU PLL Voltage: 1.70 -> auf deluxe 600FSB geht mit 1.6 ???
FSB Termination Voltage: 1.38 -> auf deluxe 600fsb geht mit 1.35???
DRAM Voltage: 2.40
NB Voltage: 1.34 1.34geht auch bis 600????
NB GTL Reference: AUTO
SB Voltage: 1.10 soll:AUTO????
PCIE SATA Voltage: 1.60 soll:AUTO???

--------------------------------

Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Normal
NB Clock Skew: Normal
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 8.0
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------

im anhang der e8600 (E0) at 4.52GHz FSB532 MP8.5 DDR532 at 1.39vcore wassergekühlt ! ....

xxx

Test-CPU: E8400 (E0)

********************************************************

boot at Load-Vcore:1.40 at 7.0x540 (3780) OKAY


8x557(DDR1114) @ 4461 @ 1,35v @ CL4-4-4-10 / HP-DUAL in 18,04+17,67 !!! (P-Level:10 /Strong) optimized

8x555(DDR1110) @ 4443 @ 1,35v @ CL4-4-4-10 / HP-DUAL in 18,13+17,43 !!! (P-Level:10 /Strong) optimized

8x549(DDR1100) @ 4391 @ 1,35v @ CL4-4-4-10 / HP-DUAL in 18,31+17,74 !!! (P-Level:10 /Strong) optimized

********************************************************





7x333(DDR1000) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 32,58+32,51 !!! (P-Level:8 /Strong)
7x333(DDR1000) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 33,45+33,07 !!! (P-Level:13 /Strong)


7x333(DDR667) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 33,61+33,45 !!! (P-Level:11 /Strong)

7x333(DDR667) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 33,71+33,33 !!! (P-Level:9 /Strong)

7x333(DDR667) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 33,73+33,23 !!! (P-Level:10 /Strong)

7x333(DDR667) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 34,07+33,45 !!! (P-Level:12 /Strong)

7x333(DDR667) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 34,10+34,58 !!! (P-Level:13 /Strong)

7x333(DDR667) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 34,26+33,39 !!! (P-Level:14 /Strong)

7x333(DDR667) @ 2338 @ 1,40v @ CL5-5-5-15 / HP-DUAL in 35,16+34,13 !!! (P-Level:14 /Strong)


7x333(DDR667) @ 2338 @ 1,40v @ CL5-4-4-9 / HP-DUAL in 36,19+35,40 !!! (P-Level:8 /Strong)


7x540(DDR540) @ 3780 @ 1,40v @ CL4-4-4-12 / HP-DUAL in 22,90+22,89 !!! (P-Level:15)

6x556 @ 3336 @ 1,31v @ CL4-4-4-12 / HP-DUAL in 22,90+22,89 !!!

*****hier der wert von einem P5K (P35)
P5K : 4410 (490X9) DDR1176 = 70,68 @L:1,432 Dist to TJMAX:44c (BIOS-Vcore:1,55000)
4-4-4-10-5-35-3-3-3 D9GKX HP-DUAL in 17,80+17,58 !!! booster level:2
*****hier der wert von einem P5K (P35)

Bios Settings für P5Q Deluxe (Bios:1802) 23.11.08 23h35

E8600 Boot at 4.47GHz (526FSB x MP:8.5 / DDR1054

CPU Ratio Setting: 8.5
FSB Frequency: 526 = 4470MHz !!!
PCIE Frequency: 101
FSB Strap to North Bridge : AUTO
DRAM Frequency: DDR2-1054MHz
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual

1st Inf: 4-4-4-10-3-25-3-3
2nd Inf: 7-3-4-4-6-4-6
3rd Inf: 13-5-1-4-4


DRAM Static Read Control: Auto
DRAM Read Training: Auto
MEM. OC Charger: Auto
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 10
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.4000 (1.3875...testing...)
CPU GTL Voltage Reference (0/2): 0.635
CPU GTL Voltage Reference (1/3): 0.640
CPU PLL Voltage: 1,54
FSB Termination Voltage: 1,28
DRAM Voltage: 2,56
NB Voltage: 1,54
NB GTL Reference: AUTO
SB Voltage: 1.30
PCIE SATA Voltage: 1.60

--------------------------------

Load-Line Calibration: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Auto
CPU Clock Skew: Auto
NB Clock Skew: Auto
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 8.5
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------



Memtest86+ v2.10 (Test #5 Loop)

E8600 @ 3780 MHz/ FSB:540 MHz/ RAM:540 MHz (DDR1080)/ CAS:4-4-4-12-3-35-6-3 7-3-5-4-5-4-6 13-5-1-4-4
DRAM Static RC: Auto / DRAM Read Training: Auto / MEM.OC Charger: Auto / Clock Tw.: Lighter / Trans. Booster: Manual / C.P.Level: 13
CPU-Vcore: 1.32 / CPU-PLL: 1.60 / FSB-T.(VTT): 1.40 / DRAM: 2.46 / NBv: 1.49 / SB1.5: 1.50 / SB1.1: 1.28 / CPU-Spread: Disabled

L1-32K: 53240 MB/s / L2-6144K: 24545 MB/s
Memory - 2048M : 6279 MB/s (Test #5 Loop /Pass:2 Errors:0)

-----------------------------------------------------

E8600 @ 3300 MHz/ FSB:550 MHz/ RAM:550 MHz (DDR1100)/ CAS:5-5-5-15-3-42-6-3 7-3-5-4-5-4-6 14-5-1-5-5
DRAM Static RC: Auto / DRAM Read Training: Auto / MEM.OC Charger: Auto / Clock Tw.: Lighter / Trans. Booster: Manual / C.P.Level: 15
CPU-Vcore: 1.30 / CPU-PLL: 1.60 / FSB-T.(VTT): 1.40 / DRAM: 2.46 / NBv: 1.31 / SB1.5: 1.50 / SB1.1: 1.10

Neujahrs Test

Ziel ist: den E8400 bei FSB: 556+ 100% Primestabil zu bekommen...

...nicht ganz einfach....

Bisher erreichte Werte sind:

580 FSB bei Prime95 Torture-Test (Small FFTs)
574 FSB bei HP-Dual-Bench (im Single-Test)
570 FSB bei HP-Dual-Bench (im Dual-Test) 570x6

100% Stabil ist 555 FSB bei Prime95 Torture-Test (In-place large FFTs)

---------------------------------------------------------

Bios Settings für P5Q Deluxe (Bios:1702) 02.01.09 17h48
welche ein booten auf 560 ermöglichen....


E8400 Boot at x.xxGHz (560FSB x MP:7.0 / DDR1122

CPU Ratio Setting: 7.0
FSB Frequency: 560
PCIE Frequency: 101
FSB Strap to North Bridge : 333 (AUTO)
DRAM Frequency: DDR2-1122MHz
DRAM CLK Skew on Channel A1: Normal (AUTO)
DRAM CLK Skew on Channel A2: Normal (AUTO)
DRAM CLK Skew on Channel B1: Normal (AUTO)
DRAM CLK Skew on Channel B2: Normal (AUTO)
DRAM Timing Control: Manual

1st Inf: 5-5-5-18-3-50-6-3
2nd Inf: 8-3-5-4-6-4-7
3rd Inf: 14-5-1-5-5

DRAM Static Read Control: Auto
DRAM Read Training: Auto
MEM. OC Charger: Auto
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 14
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.5000 (..testing...)
CPU GTL Voltage Reference (0/2): 0,670 (0.635)
CPU GTL Voltage Reference (1/3): 0,670 (0.640)
CPU PLL Voltage: 1,54
FSB Termination Voltage: 1,38
DRAM Voltage: 2,50
NB Voltage: 1,42 (1,54)
NB GTL Reference: AUTO
SB Voltage: 1.30
PCIE SATA Voltage: 1.50

--------------------------------

Load-Line Calibration: Disabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Auto
CPU Clock Skew: Delay 100ps
NB Clock Skew: Normal (Auto)
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 7.0
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------







MHz MP FSB NB FSB Term vCore at Load CPU-PLL SB PCIE



4689 9 521 1,22 1,16 1,38vcore 1,56 1,30 1,60


4527 9 503,0 1,18 1,14 1,33vcore 1,56 1,30 1,60


3960 9 440,0 1,14 1,14 1,16vcore 1,56 1,30 1,60



........thread wird noch erweitert..........

Test (05.Juni 2009) mit R507 Single Stage (Evaporator) Kühlung

Test-Setup:

Motherboard: ASUS P5Q Deluxe (Intel P45/ICH10R) (Rev.1.03G / Bios:1702)

CPU: Intel Core 2 Duo E8600 3.33GHz @ 5.5xx GHz , Stepping: E0 (6-7-A) , (Malay)
Kühlung: Single Stage Kompressor Kühlung NL11F / R507 / chilly1 Design
Memory: 2x 1024MB @ CL4-4-4-12 (1:1)
Netzteil: Enermax Infiniti 650W ATX 2.2 (EIN650AWT)
OS: Windows XP (SP2)



Bios Settings für E8600 @ P5Q Deluxe (Bios:1702) (getestet am 05.Juni 2009)
E8600 Boot at 5.35GHz (535FSB x MP:10.0 / DDR1070)

CPU Ratio Setting: 10.0
FSB Frequency: 535
PCIE Frequency: 101
FSB Strap to North Bridge : 333 (AUTO)
DRAM Frequency: DDR2-1070MHz
DRAM CLK Skew on Channel A1: Normal (AUTO)
DRAM CLK Skew on Channel A2: Normal (AUTO)
DRAM CLK Skew on Channel B1: Normal (AUTO)
DRAM CLK Skew on Channel B2: Normal (AUTO)
DRAM Timing Control: Manual

1st Inf: 4-4-4-12-6-45-6-3
2nd Inf: 8-3-6-4-6-4-6
3rd Inf: 14-5-1-5-5

DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Auto
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 14
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.7500 (..testing...)
CPU GTL Voltage Reference (0/2): 0,630 (0.635)
CPU GTL Voltage Reference (1/3): 0,630 (0.640)
CPU PLL Voltage: 1,70
FSB Termination Voltage: 1,50
DRAM Voltage: 2,60
NB Voltage: 1,42 (1,54)
NB GTL Reference: AUTO
SB Voltage: 1.30
PCIE SATA Voltage: 1.60

--------------------------------

Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Delay Auto
NB Clock Skew: Normal Auto
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 10.0
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------

Test (05.Juni 2009) mit R507 Single Stage (Evaporator) Kühlung

Test-Setup:

Motherboard: ASUS P5Q Deluxe (Intel P45/ICH10R) (Rev.1.03G / Bios:1702)

CPU: Intel Core 2 Duo E8600 3.33GHz @ 5.5xx GHz , Stepping: E0 (6-7-A) , (Malay)
Kühlung: Single Stage Kompressor Kühlung NL11F / R507 / chilly1 Design
Memory: 2x 1024MB @ CL4-4-4-12 (1:1)
Netzteil: Enermax Infiniti 650W ATX 2.2 (EIN650AWT)
OS: Windows XP (SP2)



Bios Settings für E8600 @ P5Q Deluxe (Bios:2005) (getestet am 05.Juni 2009)
E8600 Boot at 5.11GHz (538FSB x MP:9.5 / DDR1078)

CPU Ratio Setting: 9.5
FSB Frequency: 538
PCIE Frequency: 101
FSB Strap to North Bridge : 333
DRAM Frequency: DDR2-1078MHz
DRAM CLK Skew on Channel A1: Normal (AUTO)
DRAM CLK Skew on Channel A2: Normal (AUTO)
DRAM CLK Skew on Channel B1: Normal (AUTO)
DRAM CLK Skew on Channel B2: Normal (AUTO)
DRAM Timing Control: Manual

1st Inf: 5-5-5-15-4-42-6-3
2nd Inf: 7-3-5-4-5-4-7
3rd Inf: 14-5-1-5-5

DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Auto
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 15
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.7000 (..testing...)
CPU GTL Voltage Reference (0/2): 0,630 (0.635)
CPU GTL Voltage Reference (1/3): 0,630 (0.640)
CPU PLL Voltage: 1,70
FSB Termination Voltage: 1,50
DRAM Voltage: 2,54
NB Voltage: 1,42
NB GTL Reference: AUTO
SB Voltage: 1.30
PCIE SATA Voltage: 1.60

--------------------------------

Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Delay Auto
NB Clock Skew: Normal Auto
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 10.0
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------

---------------

prime

(CPU-HS:-XX/Eva:-XX) CPU-HS= maximale CPU-Heatspreader-Temperatur während Test
(CPU-HS:-XX/Eva:-XX) Eva= maximale Evaporator-Temperatur (direkt bei CPU) während Test

...Die Verdampfungstemperatur ist noch einiges tiefer als die Eva-Temp :p



10.0 x 530 (DDR1060) @ 5300 (CPU-HS:-19c / Eva:-33c) @ 1,74v @ CL4-4-4-12 / HP-DUAL in 15,58 + 15,67 !!! (P-Level:15 /lighter)

******* oben ist ohne seitenwand bei r507 gehäuse ******
- -
10.0 x 525 (DDR1050) @ 5250 (CPU-HS:-19c / Eva:-33c) @ 1,69v @ CL4-4-4-12 / error bei HP-DUAL in 15,88 + 15,59 !!! (P-Level:15 /lighter)
10.0 x 520 (DDR1040) @ 5200 (CPU-HS:-19c / Eva:-33c) @ 1,69v @ CL4-4-4-12 / HP-DUAL in 16,02 + 15,80 !!! (P-Level:15 /lighter)
-
9.5 x 551 (DDR1102) @ 5237 (CPU-HS:-19c / Eva:-33c) @ 1,74v @ CL4-4-4-12 / HP-DUAL in 15,28 + 15,47 <- bester wert

9.5 x 543 (DDR1086) @ 5161 (CPU-HS:-19c / Eva:-33c) @ 1,69v @ CL4-4-4-12 / HP-DUAL in 15,80 + 15,89 !!! (P-Level:15 /lighter)
9.5 x 538 (DDR1076) @ 5116 (CPU-HS:-19c / Eva:-33c) @ 1,69v @ CL4-4-4-12 / HP-DUAL in 15,91 + 16,09 !!! (P-Level:15 /lighter)
9.5 x 530 (DDR1060) @ 5040 (CPU-HS:-21c / Eva:-34c) @ 1,60v @ CL4-4-4-12 / HP-DUAL in 16,22 + 16,30 !!! (P-Level:15 /lighter)
- -
9.0 x 555 (DDR1110) @ 4990 (CPU-HS:-25c / Eva:-37c) @ 1,496v @ CL4-4-4-12 / HP-DUAL in 16,03 + 16,20 !!! (P-Level:15 /lighter)
9.0 x 550 (DDR1100) @ 4954 (CPU-HS:-25c / Eva:-37c) @ 1,496v @ CL4-4-4-12 / HP-DUAL in 16,28 + 16,41 !!! (P-Level:15 /lighter)
- -
8.5 x 560 (DDR1120) @ 4760 (CPU-HS:-26c / Eva:-37c) @ 1,496v @ CL4-4-4-12 / HP-DUAL in 16,58 + 16,98 !!! (P-Level:15 /lighter)
8.5 x 555 (DDR1110) @ 4719 (CPU-HS:-25c / Eva:-37c) @ 1,496v @ CL4-4-4-12 / HP-DUAL in 16,86 + 16,98 !!! (P-Level:15 /lighter)
8.5 x 550 (DDR1100) @ 4679 (-25/-37) @ 1,496v @ CL4-4-4-12 / HP-DUAL in 17,05 + 17,03 !!! (P-Level:15 /lighter)
8.5 x 540 (DDR1080) @ 4590 (-XX/-XX) @ 1,496v @ CL4-4-4-12 / HP-DUAL in 17,30 + 17,38 !!! (P-Level:15 /lighter)
- -
8.0 x 560 (DDR1120) @ 4480 (-XX/-XX) @ 1,456v @ CL4-4-4-12 / HP-DUAL in 17,66 + 17,59 !!! (P-Level:15 /lighter)
8.0 x 550 (DDR1100) @ 4404 (-XX/-XX) @ 1,40v @ CL4-4-4-12 / HP-DUAL in 18,08 + 17,84 !!! (P-Level:15 /lighter)
- -
7.0 x 565 (DDR1130) @ 3959 (-XX/-XX) @ 1,456v @ CL4-4-4-12 / HP-DUAL in 19,30+19,28 !!! (P-Level:15 /lighter)
7.0 x 560 (DDR1120) @ 3920 (-XX/-XX) @ 1,456v @ CL4-4-4-12 / HP-DUAL in 19,67 + 19,50 !!! (P-Level:15 /lighter)

---------------

prime

5114@1.77/10.0 x 511/cpu:- 1/eva:-22,0/red:-33/blue:-33 (bios 2005)
5116@1.75/9.5 x 538/cpu:- 4/eva:-23,1/red:-34/blue:-34 (bios 2005)
5082@1.74/9.5 x 535/cpu:- 8/eva:-25,2/red:-35/blue:-35
4935@1.64/9.5 x 519/cpu:-11/eva:-28,8/red:-37/blue:-37

4995@1.67/9.0 x 555/cpu:-9/eva:-27,1/red:-37/blue:-36

4882@1.64/9.0 x 542/cpu:-12/eva:-28,9/red:-37/blue:-37
4610@1.45/9.0 x 512/cpu:-21/eva:-34,3/red:-40/blue:-40
4467@1.44/8.0 x 558/cpu:-18/eva:-33,7/red:-39/blue:-40

4152@1,26/10 x415/cpu:-26/eva:-37,4/red:-42/blue:-42

Test : Max FSB mit Minimum Voltages (mit HPDual3355)
(getestet am 13.Juni 2009)

Test-Setup:

Motherboard: ASUS P5Q Deluxe (Intel P45/ICH10R) (Rev.1.03G / Bios:2005)

CPU: Intel Core 2 Duo E8600 3.33GHz @ 5.5xx GHz , Stepping: E0 (6-7-A) , (Malay)
Kühlung: Single Stage Kompressor Kühlung NL11F / R507 / chilly1 Design
Memory: 2x 1024MB @ CL5-5-5-15 (1:1) (black dimm slots)
Netzteil: Enermax Infiniti 650W ATX 2.2 (EIN650AWT)
OS: Windows XP (SP2)

E8600 Boot at 5.08GHz (565FSB x MP:9.0 / DDR1130)

Bios-Setting:

CPU Ratio Setting: 9.0
FSB Frequency: 565
PCIE Frequency: 101
FSB Strap to North Bridge : 333
DRAM Frequency: DDR2-1132MHz
DRAM CLK Skew on Channel A1: Normal (AUTO)
DRAM CLK Skew on Channel A2: Normal (AUTO)
DRAM CLK Skew on Channel B1: Normal (AUTO)
DRAM CLK Skew on Channel B2: Normal (AUTO)
DRAM Timing Control: Manual

1st Inf: 5-5-5-18-6-55-6-3 (5-5-5-18-3-50-6-3)
2nd Inf: 8-3-5-4-6-4-7
3rd Inf: 14-5-1-5-5

DRAM Static Read Control: Auto
DRAM Read Training: Auto
MEM. OC Charger: Auto
Ai Clock Twister: Lighter
Ai Transaction Booster: Manual
Common Performance Level: 16 (14)
(Pull-In of CHx PHx:all Disabled)

CPU Voltage: 1.6000 (@Load:1,64v)
CPU GTL Voltage Reference (0/2): 0,630 (0.635)
CPU GTL Voltage Reference (1/3): 0,630 (0.640)
CPU PLL Voltage: 1,50
FSB Termination Voltage: 1,30
DRAM Voltage: 2,44
NB Voltage: 1,30
NB GTL Reference: AUTO
SB Voltage: 1.30
PCIE SATA Voltage: 1.50

--------------------------------

Load-Line Calibration: Disabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Enabled
CPU Clock Skew: Delay 100ps
NB Clock Skew: Normal Auto
CPU Margin Enhancement: Optimized
--------------------------------

CPU Ratio Setting: 9.0
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel(R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
--------------------------------



Test #1: vNB Voltage und möglicher FSB... (mit HPDual3355)
(mit vNB:1,22v FSB:533x9,5 at 5.07 GHz bei HPDual3355 möglich (Lighter/PL:16(5-5-5-18) )
mit MP:9,0 erreicht das Board vor der CPU das Limit ! max. Board-FSB:564!
CPU läuft mit MP: 9,0 x FSB: 564 auf 5.07 GHz

*********max cputakt
*** 5202 (520x10,0)hp3355Dual in 66,20s/@Load:1,76v/ (CPU-HS:-10/ eva:-27 )
PLL:1,xx/FSB:1,xx/NB:1,xx/SB:1,xx/PCIE: 1,xx/Lighter/PL:xx(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
*********max cputakt

cpu-limit at 5.177@1,72v@cpuHS-12


*** 5115 (511x10,0)hp3355Dual in 67,70s/@Load:1,64v/ (CPU-HS:-16/ eva:-32 )
PLL:1,50/FSB:1,30/NB:1,22/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
****************
5090 (509x10,0)hp3355Dual in 67,84s/@Load:1,64v/ (CPU-HS:-16/ eva:-32 )
PLL:1,50/FSB:1,30/NB:1,18/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
------------------------------------------------------------
Board-Limit ab 540FSB mit MP:9,5x bei CPU-Takt 5.13GHz (540x9,5)

5177(545x9,5)CPU-HS:-12c / hp3355Dual in 65,84s/@Load:1,72v/ PLL:1,60?/FSB:1,40??/NB:1,34/SB:1,30/PCIE: 1,60? /Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)

5131(540x9,5)hp3355Dual in 66,36s/@Load:1,66v/ PLL:1,50/FSB:1,30/NB:1,26/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
5071(533x9,5)hp3355Dual in 67,08s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,22/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4836(509x9,5)hp3355Dual in 70,45 s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,18/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
----------------------------------------------------------------
mit MP: 9,0 ist Board sehr am Limit
cpu ist nicht am limit at 5084 at 1,72v !!!
cpu sollte 5.17 schaffen at 1,72! (wäre ja 574fsb?)
mit MP9,0 bei FSB: 565 -> das Limit vom Board erreicht !

5076(564x9,0)hp3355Dual in 65,95s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,30/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4926(547x9,0)hp3355Dual in 67,61 s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,26/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4782(531x9,0)hp3355Dual in 69,86 s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,22/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4603 (511x9,0)hp3355Dual in 72,70s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,18/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
----------------------------------------------------------------
4845(570x8,5)hp3355Dual in 68,01s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4807(565x8,5)hp3355Dual in 68,55s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,30/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4679(550x8,5)hp3355Dual in 70,39s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,26/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4500(530x8,5)hp3355Dual in 73,33s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,22/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
4293(505x8,5)hp3355Dual in 77,03s/@Load:1,64v/ PLL:1,50/FSB:1,30/NB:1,18/SB:1,30/PCIE: 1,50/Lighter/PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)
----------------------------------------------------------------


CPU PLL Voltage: 1.60 -> bis 600 ???
FSB Termination Voltage: 1.35 bis 600 1.35???
DRAM Voltage: 2.40
NB Voltage: ???? 1.34geht auch bis 600????
NB GTL Reference: AUTO
SB Voltage: 1.10 soll:AUTO????
PCIE SATA Voltage: 1.60 soll:AUTO???

kurzer maximal Test siehe Screenshot:

new2010 test mit 8600e0 PL:16(5-5-5-18-6-55-6-3/8-3-5-4-6-4-7/14-5-1-5-5)

new2010-5226(522x10)hpDual in 16,45s/@Load:1,65v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16 (bios-set:1,60)

new2010-5218(522x10)hpDual in 16,27s/@Load:1,60v/ PLL:1,50/FSB:1,30/NB:1,30/SB:1,30/PCIE: 1,50/Lighter/PL:16

new2010-5186(518x10)hpDual in 16,50s/@Load:1,54v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16 (bios-set:1,50)

new2010-5123(512x10)hpDual in 16,56s/@Load:1,49v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16 (bios-set:1,45)

new2010-5000(500x10)hpDual in 1x,xxs/@Load:1,44v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16 (bios-set:1,40)


new2010-5267(554x9,5)hpDual in 15,95s/@Load:1,592v/ PLL:1,x0/FSB:1,x0/NB:1,x0/SB:1,x0/PCIE: 1,x0/Lighter/PL:16
new2010-5244(552x9,5)hpDual in 15,95s/@Load:1,592v/ PLL:1,x0/FSB:1,x0/NB:1,x0/SB:1,x0/PCIE: 1,x0/Lighter/PL:16

new2010-5229(550x9,5)hpDual in 16,03s/@Load:1,65v/ PLL:1,50/FSB:1,30/NB:1,30/SB:1,30/PCIE: 1,50/Lighter/PL:16
new2010-5070(534x9,5)hpDual in 16,52s/@Load:1,60v/ PLL:1,50/FSB:1,30/NB:1,30/SB:1,30/PCIE: 1,50/Lighter/PL:16
new2010-4987(525x9,5)hpDual in 16,88s/@Load:1,54v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16 (bios-set:1,50)
new2010-4942(520x9,5)hpDual in 17,17s/@Load:1,49v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16 (bios-set:1,45)
new2010-4814(506x9,5)hpDual in 17,56s/@Load:1,44v/ PLL:1,50/FSB:1,30/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16 (bios-set:1,40)

new2010-4818(535x9,0)hpDual in 17,09s/@Load:1,57v/ PLL:1,60/FSB:1,34/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16

new2010-4679(550x8,5)hpDual in 17,56s/@Load:1,57v/ PLL:1,60/FSB:1,34/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16

new2010-4569(571x8,0)hpDual in 17,66s/@Load:1,57v/ PLL:1,60/FSB:1,34/NB:1,34/SB:1,30/PCIE: 1,50/Lighter/PL:16
hier oben max fsb zu mp test !!!