ASUS P5K Premium WiFi (Intel P35/ICH9R) (Rev.2.00G / Bios:0802) Overclock Review
(Part Number: 90-MBB760-G0EAY00Z)

Chipset: Intel P35 (Rev.A2)
Southbridge: Intel 82801IR (ICH9R)
LPCIO: Winbond W83627DHG
Clock Generator: ICS9LPRS918BKL (für SETFSB)
-------------------------------------------------------------

Test-Setup:
Motherboard: ASUS P5K Premium WiFi (Rev.2.00G / Bios:0802)
CPU: Intel Core 2 Duo E8400 3.00GHz, SLB9J (6-7-A E0-Stepping)
Kühlung: Thermaltake IF-14 (Luftkühlung)
Memory: 2x 1024MB (D9GKX / MT47H64M8B6-25E)
(tCL:4 tRCD:4 tRP:4 tRAS:10 tRFC:42 PL:6 tWTP:13 tWTR:10 tRRD:3 tRD_WR:8 tRTP:5 CMD:2T)
Netzteil: Enermax Infiniti 650W ATX 2.2 (EIN650AWT)
OS: Windows XP (SP2)

dieses Mainboard überzeugte schon nach kurzer Zeit,
da ein sehr hoher 100% stabiler FSB möglich ist. (ca. 580+ ...event. noch mehr...) :)

TJ-Max:100c

Höchster Erreichter bootfähiger FSB-Takt: 604 x 7,0 / CPU: 4.22GHz at Load:1,42v / DDR 1208 / CL5-5-5-15-6-55-6-3-3 / RL3=PL:15 ... inkl. prime stabil !!! :yeah:
(tCL:5 tRCD:5 tRP:5 tRAS:15 tRFC:55 PL:15 tWTP::14 tWTR:11 tRRD:6 tRD_WR:8 tRTP:5 CMD:2T)



Höchster Erreichter bootfähiger FSB-Takt: 580 x 7,0 / CPU: 4.06GHz at Load:1,28v / DDR 1150 / CL5-4-4-15-6-55-6-3-3 / RL3=PL:15 ... inkl. prime stabil !!! :yeah:
(tCL:5 tRCD:4 tRP:4 tRAS:15 tRFC:55 PL:15 tWTP::14 tWTR:11 tRRD:6 tRD_WR:8 tRTP:5 CMD:2T)

Höchster Erreichter bootfähiger FSB-Takt..@..CL4-4-4-4....inkl. prime stabil....kommt noch wird nochgetestet...
FSB: 485 x 9,0 / CPU: 4.36GHz / DDR 1164 at Load:1,376v (bios:1.4000vCore / (CL4-4-4-4-1-25-5-2-1 / BL2=PL:6 @ 485 FSB)

(tCL:4 tRCD:4 tRP:4 tRAS:4 tRFC:25 PL:6 tWTP:12 tWTR:9 tRRD:1 tRD_WR:8 tRTP:4 CMD:2T)
bios-set war: (tCL:4 tRCD:4 tRP:4 tRAS:4 tRRD:1 tRFC:25 tWR:5 tWTR:2 tRTP:1 ) d.h. tWTR2=9!!



nähere Infos + benchmarks kommen noch....

CPU-Takt: / FSB / DDR-MHz / @LOAD / BIOS-Setting(Vcore) / CPU-Temp-MAX

***********************************************************


***********************************************************
4.747 GHz (8,5x) / 558 / 558 / 1,47v / 1,5000 / 63c Prime 4min OKAY Distance to TJ Max:37 (TJMax:100)

4.652 GHz (8,5x) / 547 / 547 / 1,42v / 1,4500 / 58c Prime xmin OKAY Distance to TJ Max:42 (TJMax:100)
--------------------------------------------------------------------------------------------
4.645 GHz (8,0x) / 580 / 580 / 1,47v / 1,5000 / 63c Prime 4min OKAY Distance to TJ Max:37 (TJMax:100)
4.582 GHz (8,0x) / 572 / 572 / 1,42v / 1,4500 / 58c Prime xmin OKAY Distance to TJ Max:42 (TJMax:100)
4.560 GHz (8,0x) / 570 / 570 / 1,37v / 1,4000 / 58c Prime 7min OKAY Distance to TJ Max:43 (TJMax:100)
4.525 GHz (8,0x) / 565 / 565 / 1,35v / 1,3750 / 54c Prime 7min OKAY Distance to TJ Max:47 (TJMax:100)
4.388 GHz (7,5x) / 585 / 585 / 1,33v / 1,3500 / 54c Prime 7min OKAY Distance to TJ Max:47 (TJMax:100)
***********************************************************


(Der Speicher wurde beim Prime95(v25.8) Torture Test immer mit tCL:5-tRCD:4-tRP:4-tRAS:9 betrieben)

--------------------------------------------------------------------------------------------------


weitere Tests auf diesem Motherboard:

Intel Core 2 Quad Q6600 2.40GHz @ 3.942 GHz SLACR (6-F-B G0-Stepping) Wassergekühlt *Update*

Intel Core 2 Quad Q6600 2.40GHz @ 3.942 GHz SLACR (6-F-B G0-Stepping) Luftgekühlt IFX-14 *Update*

Bios Settings (niedrigste board voltage bis: xxx FSB Stabil)

für Boot at FSB: xxx @ DDR xxx CL5-5-5-15-x-xx-x-x-x (Performance Level:12)

Bios-Settings für Q6600 stabil at FSB:490 x 7.0 (3.43GHz)

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Setting: 7.0
FSB Strap to North Bridge: 333
FSB Frequency: 490
PCI-E Frequency: 101 (105@600?)
DRAM Frequency: DDR2-981
DRAM Command Rate: 2N
DRAM Timing Control: Manual
Timing Information: 5-5-5-15-3-42-6-3-3

CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Pre Time: 5
RAS# ACT Time: 15
RAS# to RAS# Delay: Auto
REF Cycle Time: Auto
WRITE Recovery Time: Auto
WRITE to READ Delay: Auto
READ to PRE Time: Auto
DRAM Static Read Control: Disabled

Transaction Booster: Disabled
Relax Level: 0

CPU Voltage: 1.3000
CPU PLL Voltage: 1.70
FSB Termination Voltage: 1.50
Dram Voltage: 2.10
NB Voltage: 1.70
SB Voltage: 1.20
Clock Over-Charging Voltage: 0.80
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63x
NB GTL Voltage Reference: 0.67x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto

Bios Settings (für E8400 stabil at FSB: 575 x 7.0 @ xx.xxGHz / DDR 1150 CL5-4-4-15-6-55-6-3-3 (Performance Level:15)


JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Setting: 7.0
FSB Strap to North Bridge: Auto
FSB Frequency: 575
PCI-E Frequency: 101 (105@600?)
DRAM Frequency: DDR2-1152
DRAM Command Rate: 2N
DRAM Timing Control: Manual
Timing Information: CL5-4-4-15-6-55-6-3-3

CAS# Latency: 5
RAS# to CAS# Delay: 4
RAS# Pre Time: 4
RAS# ACT Time: 15
RAS# to RAS# Delay: 6
REF Cycle Time: 55
WRITE Recovery Time: 6
WRITE to READ Delay: 3
READ to PRE Time: 3
DRAM Static Read Control: Disabled

Transaction Booster: Disabled
Relax Level: 3 (= Performance Level:15)

CPU Voltage: 1.3000 (@Load:1.28v)
CPU PLL Voltage: 1.70
FSB Termination Voltage: 1.40
Dram Voltage: 2.55
NB Voltage: 1.70
SB Voltage: 1.05
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: Auto
NB GTL Voltage Reference: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto

Bios Settings (für E8400 stabil at FSB: 604 x 6.0 @ xx.xxGHz / DDR 1208 CL5-5-5-15-6-55-6-3-3 (Performance Level:15)

(Test vom: 06-02-2010) (CPU-Z VERIFIED)

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Setting: 6.0
FSB Strap to North Bridge: Auto
FSB Frequency: 604
PCI-E Frequency: 101
DRAM Frequency: DDR2-1210
DRAM Command Rate: 2N
DRAM Timing Control: Manual
Timing Information: CL5-5-5-15-6-55-6-3-3

CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Pre Time: 5
RAS# ACT Time: 15
RAS# to RAS# Delay: 6
REF Cycle Time: 55
WRITE Recovery Time: 6
WRITE to READ Delay: 3
READ to PRE Time: 3
DRAM Static Read Control: Disabled

Transaction Booster: Disabled
Relax Level: 3 (= Performance Level:15)

CPU Voltage: 1.4500 (@Load:1.28v)
CPU PLL Voltage: 1.70
FSB Termination Voltage: 1.40
Dram Voltage: 2.55
NB Voltage: 1.70
SB Voltage: 1.05
Clock Over-Charging Voltage: 1.00
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: Auto
NB GTL Voltage Reference: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto