Intel Core 2 Quad Q6600 2.40GHz @ 3.942 GHz SLACR (6-F-B G0-Stepping) Luftgekühlt IFX-14 * Update * (FPO# L740A490)

original Thema anzeigen

19.01.09, 08:23:51

gigatron

geändert von: gigatron - 09.02.10, 20:20:44

Intel Core 2 Quad Q6600 2.40GHz SLACR (6-F-B G0-Stepping / FPO#: L740A490)

Luftgekühlt IFX-14 @ 3.942 GHz (CPU-Z VERIFIED) (19-01-2009)

Core(TM)2 Quad Q6600, LGA 775 (Kentsfield)
2.40 GHz, 8MB L2 Cache, 1066 MHZ FSB
PRODUCT CODE: BX80562Q6600SLACR
MM#: 891337 FPO#: L740A490 (Malay)
VERSION#: E10342-001 1.35V max
PACKDATE: 11/29/07
(Wafer-ID: 2L73993 0A1524)

Test-Setup:
Motherboard: ASUS P5K Premium WiFi (Rev.2.00G / Bios:0802) / Part Number: 90-MBB760-G0EAY00Z
Chipset: Intel P35 (Rev.A2)
SB: Intel 82801IR (ICH9R)
LPCIO: Winbond W83627DHG

CPU: Intel Core 2 Quad Q6600 2.40GHz, Stepping: G0 (6-F-B) , (Malay)
Kühlung: Thermaltake IFX-14 (Luftkühlung)
Memory: 2x 1024MB @ BIOS: tCL:4 tRCD:4 tRP:4 tRAS:10 tRFC:42 Perf.Level:6 Write to Precharge Delayed:13 tWTR:10 tRRD:3 tRD_WR:8 tRTP:5 CMD:2T
Netzteil: Enermax Infiniti 650W ATX 2.2 (EIN650AWT)
OS: Windows XP (SP2)

TJ-Max:90c

Als Stabilitäts-Test wurde Prime95(v25.8) Torture Test (In-place large FFTs) verwendet.

Torture Test Settings:
In-place large FFTs (maximum heat,power consumption, some RAM tested)
Number of torture test threads to run: 4


CPU-Takt: / FSB / DDR-MHz / @LOAD / BIOS-Setting(Vcore) / CPU-Temp-MAX / Prime Dauer / Distance to TJ Max (90c) / Ambiente

3.842 GHz / 480 / 480 (1:1) / 1,43v/ 1,4500 / 64c / Prime XXmin OKAY / Distance to TJ Max:26c (TJMax:90c) / Ambiente: 25c



3.737 GHz / 415 / 498 (5:6) / 1,38v/ 1,4000 / 60c / Prime XXmin OKAY / Distance to TJ Max:30c (TJMax:90c) / Ambiente: 24c (CL4-4-4-10) FAN:3x120mm @ 5 Volt
3.680 GHz / 460 / 460 (1:1) / 1,30v/ 1,3250 / 53c / Prime XXmin OKAY / Distance to TJ Max:37c (TJMax:90c) / Ambiente: 25c



3.557 GHz / 445 / 445 (1:1) / 1,26v/ 1,2750 / 51c / Prime XXmin OKAY / Distance to TJ Max:39c (TJMax:90c) / Ambiente: 25c
3.334 GHz / 417 / 417 (1:1) / 1,18v/ 1,2000 / 47c / Prime 05min OKAY / Distance to TJ Max:43c (TJMax:90c) / Ambiente: 25c

---------------------------------------------------

hier noch mhz-volt-temp Werte:
*** 3.71 GHz / 412 / 1,34v/ 55c Distance to TJ Max:35c (TJMax:90c)
*** 3.55 GHz / 394 / 1,29v/ 49c Distance to TJ Max:41c (TJMax:90c)
*** 3.40 GHz / 377 / 1,21v/ 41c Distance to TJ Max:49c (TJMax:90c)




Dateianhang (verkleinert):

 Q6600_at_490x7_at3.43GHz_stabil_IFX-14.gif (255.03 KByte | 65 mal heruntergeladen | 16.19 MByte Traffic)

Dateianhang (verkleinert):

 Q6600_at_438x9_at3.942GHz_1.48v_stabil_IFX-14_CB13440.gif (354.51 KByte | 55 mal heruntergeladen | 19.04 MByte Traffic)

Dateianhang (verkleinert):

 Q6600_at_490x8_at3.920GHz_1.456v_stabil_IFX-14.gif (199.51 KByte | 61 mal heruntergeladen | 11.89 MByte Traffic)

19.01.09, 09:46:21

gigatron

geändert von: gigatron - 19.01.09, 15:29:30

Bios-Settings für Q6600 stabil at FSB:490 x 7.0 (3.43GHz)

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Setting: 7.0
FSB Strap to North Bridge: 333
FSB Frequency: 490
PCI-E Frequency: 101 (105@600?)
DRAM Frequency: DDR2-981
DRAM Command Rate: 2N
DRAM Timing Control: Manual
Timing Information: 5-5-5-15-3-42-6-3-3

CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Pre Time: 5
RAS# ACT Time: 15
RAS# to RAS# Delay: Auto
REF Cycle Time: Auto
WRITE Recovery Time: Auto
WRITE to READ Delay: Auto
READ to PRE Time: Auto
DRAM Static Read Control: Disabled

Transaction Booster: Disabled
Relax Level: 0

CPU Voltage: 1.3000
CPU PLL Voltage: 1.70
FSB Termination Voltage: 1.50
Dram Voltage: 2.10
NB Voltage: 1.70
SB Voltage: 1.20
Clock Over-Charging Voltage: 0.80
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63x
NB GTL Voltage Reference: 0.67x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto


19.01.09, 15:31:42

gigatron

Bios-Settings für Q6600 stabil at FSB:485 x 8.0 (3.88GHz)

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Setting: 8.0
FSB Strap to North Bridge: 333
FSB Frequency: 485
PCI-E Frequency: 101 (105@600?)
DRAM Frequency: DDR2-971
DRAM Command Rate: 2N
DRAM Timing Control: Manual
Timing Information: 5-5-5-15-3-42-6-3-3

CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Pre Time: 5
RAS# ACT Time: 15
RAS# to RAS# Delay: Auto
REF Cycle Time: Auto
WRITE Recovery Time: Auto
WRITE to READ Delay: Auto
READ to PRE Time: Auto
DRAM Static Read Control: Disabled

Transaction Booster: Disabled
Relax Level: 0

CPU Voltage: 1.4750
CPU PLL Voltage: 1.50
FSB Termination Voltage: 1.40
Dram Voltage: 2.10
NB Voltage: 1.40
SB Voltage: 1.20
Clock Over-Charging Voltage: 0.80
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63x
NB GTL Voltage Reference: 0.67x
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto


 
Powered by: phpMyForum 4.1.8.1 © Christoph Roeder