02.09.09, 12:58:34
gigatron
Bios Settings # 5 (02.September 2009)
Core:
4.347 GHz / Uncore:
3.726 GHz / QPI:
3.726 GHz / DDR1656 (
828MHz) 7-8-7-20-1
(NT:LC6550 + Geforce7900GT)
test at triple channel ADATA
CPU Clock Ratio:
20 X (Intel(R) Turbo Boost Tech. [Enabled])
*CPU Frequency : 4.14GHz (207x20)
BCLK Frequency(Mhz) [
207] Turbo:ON ->
21 x 207 =
4.347 GHz
All CPU Cores + Multi-Threading [Enabled]
************************************************************
- - UnCore & QPI Features - -
QPI Link Speed: [
x36]
*QPI Link Speed : 7.45GHz
Uncore Frequency [x18]
Uncore Frequency : 3726MHz
Isochronous Support [Enabled]
- - Advanced Clock Control - -
CPU Clock Drive [700mV]
PCI Express Clock Drive [700mV]
CPU Clock Skew [ 0ps]
IOH Clock Skew [ 0ps]
- - Advanced DRAM Features - -
Performance Enhance [Standard]
System Memory Multiplier (SPD) [8.0]
*Memory Frequency(Mhz) 1066 : 1656
DRAM Timing Selectable (SPD) [Manual]
Profile DDR Voltage: 1.5V <- türkis nicht änderbar
Profile QPI Voltage: 1.2V <- türkis nicht änderbar
- - Timing Settings: - -
CAS Latency Time - tRCD - tRP - tRAS - CMD: 7-8-7-20-1
tRC - tRRD - tWTR - tWR - tRFC - tRTP - tFAW - CMD: 1 (alles auto gestellt !!!) 27-4-4-8-60-4-16-1
Round Trip Latency: [88]
- - Turnaround Settings: - - (alles auto gestellt !!!)
Different DIMMs (Writes Followed by Reads) : 6
Different Ranks (Writes Followed by Reads) : 6
On The Same Rank (Writes Followed by Reads) : 6
Different DIMMs (Reads Followed by Writes) : 8
Different Ranks (Reads Followed by Writes) : 8
On The Same Rank (Reads Followed by Writes) : 8
Different DIMMs (Reads Followed by Reads) : 6
Different Ranks (Reads Followed by Reads) : 5
On The Same Rank (Reads Followed by Reads) : 1
Different DIMMs (Writes Followed by Writes) : 6
Different Ranks (Writes Followed by Writes) : 6
On The Same Rank (Writes Followed by Writes) : 1
- - Advanced Voltage Control: - -
Load Line Calibration : [Disabled]
CPU Vcore 1.14375V : [1.40000V]
QPI/Vtt Voltage 1.200V : [1.360V]
CPU PLL 1.800V : [1.800V]
>>> MCH/ICH
PCIE 1.500V : [1.500V]
QPI PLL 1.100V : [1.100V]
IOH Core 1.100V : [1.200V]
eventuell erhöhen
ICH I/O 1.500V : [1.500V]
ICH Core 1.100V : [1.100V]
>>> DRAM
DRAM Voltage 1.500V : [1.640V]
DRAM Termination 0.750V : [Auto]
Ch-A Data VRef. 0.750V : [Auto]
Ch-B Data VRef. 0.750V : [Auto]
Ch-C Data VRef. 0.750V : [Auto]
Ch-A Address VRef. 0.750V : [Auto]
Ch-B Address VRef. 0.750V : [Auto]
Ch-C Address VRef. 0.750V : [Auto]
-----------------------------------------------------------
Core:
4368[x21] / Uncore:
3744[x18] / QPI:
3744[x18] / RAM:624 [x3] 6-6-6-18-1N (Triple) / (BCLK:208)
HP-Dual:
14,48s / HP-Quad:
16,89s/ CB R10 xCPU:
21179 Turbo:ON
v@Load:
1,344v (Max:208x21) bios 1,4125v dist to max:26 / CPU:69c (wasser:28)
----------------------------------------------------------
Core:
4326[x21] / Uncore:
3708[x18] / QPI:
3708[x18] / RAM:824 [x4] 8-8-8-24-2N (Triple) / (BCLK:206)
HP-Dual:
15,55s / HP-Quad:
18,16s/ CB R10 xCPU:
20721 Turbo:ON
v@Load:
1,34v (Max:206x21) bios 1,40v dist to max:26 / CPU:69c (wasser:28)
14.05.10, 14:48:41
air
geändert von: air - 14.05.10, 14:55:51
Bios Settings # 6 (14.Mai 2010)
Core: 4.372 GHz / Uncore: 3.332 GHz / QPI: 3.744 GHz / DDR1666 (833MHz) 7-8-7-20-1
vCore@Load Prime 8 Threads: 1,29v / Dist to Max:37 / CPU:63c (Wasser:14c) / CB:17c
(NT:Enermax + Asus Geforce 285GTX / Bios: F10h)
test at Dual channel Elpida BBSE
CPU Clock Ratio: 22 X (Intel(R) Turbo Boost Tech. [Enabled])
*CPU Frequency : 4.37GHz (208x21)
BCLK Frequency(Mhz) [208] Turbo:ON -> 21 x 208 = 4.37 GHz
All CPU Cores + Multi-Threading [Enabled]
************************************************************
- - UnCore & QPI Features - -
QPI Link Speed: [x36]
*QPI Link Speed : 7.49GHz
Uncore Frequency [x16]
Uncore Frequency : 3332MHz
Isochronous Support [Enabled]
- - Advanced Clock Control - -
CPU Clock Drive [800mV]
PCI Express Clock Drive [900mV]
CPU Clock Skew [ 0ps]
IOH Clock Skew [ 0ps]
- - Advanced DRAM Features - -
Performance Enhance [Standard]
System Memory Multiplier (SPD) [8.0]
*Memory Frequency(Mhz) 1066 : 1666
DRAM Timing Selectable (SPD) [Manual]
Profile DDR Voltage: 1.5V <- türkis nicht änderbar
Profile QPI Voltage: 1.2V <- türkis nicht änderbar
- - Timing Settings: - -
CAS Latency Time - tRCD - tRP - tRAS - CMD: 7-8-7-20-1
tRC - tRRD - tWTR - tWR - tRFC - tRTP - tFAW - CMD: 1 (alles auto gestellt !!!) 27-4-4-8-60-4-16-1
Round Trip Latency: [88]
- - Turnaround Settings: - - (alles auto gestellt !!!)
Different DIMMs (Writes Followed by Reads) : 7
Different Ranks (Writes Followed by Reads) : 7
On The Same Rank (Writes Followed by Reads) : 6
Different DIMMs (Reads Followed by Writes) : 7
Different Ranks (Reads Followed by Writes) : 7
On The Same Rank (Reads Followed by Writes) : 7
Different DIMMs (Reads Followed by Reads) : 6
Different Ranks (Reads Followed by Reads) : 5
On The Same Rank (Reads Followed by Reads) : 1
Different DIMMs (Writes Followed by Writes) : 6
Different Ranks (Writes Followed by Writes) : 6
On The Same Rank (Writes Followed by Writes) : 1
- - Advanced Voltage Control: - -
Load Line Calibration : [Enabled]
CPU Vcore 1.14375V : [1.33125V]
QPI/Vtt Voltage 1.200V : [1.320V]
CPU PLL 1.800V : [1.800V]
>>> MCH/ICH
PCIE 1.500V : [1.500V]
QPI PLL 1.100V : [1.100V]
IOH Core 1.100V : [1.100V] eventuell erhöhen
ICH I/O 1.500V : [1.500V]
ICH Core 1.100V : [1.100V]
>>> DRAM
DRAM Voltage 1.500V : [1.680V]
DRAM Termination 0.750V : [Auto]
Ch-A Data VRef. 0.750V : [Auto]
Ch-B Data VRef. 0.750V : [Auto]
Ch-C Data VRef. 0.750V : [Auto]
Ch-A Address VRef. 0.750V : [Auto]
Ch-B Address VRef. 0.750V : [Auto]
Ch-C Address VRef. 0.750V : [Auto]
-----------------------------------------------------------